Interactive Home Support

1. 
   

   How to set up smart scenes

   
   

   With so many devices in our home today, use a smart scene to convert a single press into multiple actions.

   
   
   
   
   1. Open the Interactive Home app and select "Smart" 
      
   
   
   2. Select the "Scene" tab
   
   
   3. Select the "+" in the top right
   
   
   4. Create a name for your scene (Something you can easily remember and execute using a voice assistant)
   
   
   5. Select your prefered smart scene image from our current selection.
   
   
   6. Select "Add Actions" here is where you add all the triggers you would like your device to action when you select this smart scene.
   
   
   7. 
      "Show on the home page" (Optional) This trigger will allow you to quickly toggle your smart scene from the home page.
   
   
   8. Once done, select "Save" in the top right
   
   
   
   

Note: To delete an action, slide your finger from right to left on the action you wish to delete.

2. 
   

   How to set up smart automation

   
   

   With the ability to turn on and off devices based on a schedule, temperature/humidity/weather/sunrise and sunset of your home, you are also able to trigger an automation based off another device's actions.

   
   
   
   
   1. Open the Interactive Home app and select "Smart" 
      
   
   
   2. Select the "Automation" tab
   
   
   3. Select the "+" in the top right
   
   
   4. Create a name for your automation (Something you can easily remember)
   
   
   5. Select your prefered smart automation image from our current selection.
   
   
   6. Select "Any condition is met" and you have the ability to select either:
      
      
      
      • 
        Any condition is met - Where any of the following conditions are met, execute the following actions
      
      
      • 
        All conditions are met - When all conditions are met, execute the following actions
      
      
      
      
   
   
   7. Select "Add Conditions" and add any condition you would like to use as the trigger for your automation.
   
   
   8. Under "Carry out the following actions" select "Add Actions" and select the following actions you would like to be triggered in this animation.
   
   
   9. 
      Valid Time Period (optional)
      
      
      
      • This feature is if you would only like your automation to run on specific days within a specific time window.
      
      
      
      
   
   
   10. Select your "Current city" and prefered valid time period followed by what days you would like this time period to be repeated on.
   
   
   11. Once done, select "Next" in the top right
   
   
   12. Once you have all your settings set for your animation, select "Save" in the top right
   
   
   
   

With automations, you have the ability to create virtually any executable setup for all your multiple devices. Occupancy sensor to trigger on room lights for a specific amount of time, When you leave the house you can arm all your cameras, sensors and even your alarm. The sky is the limit

Note: To delete a condition/action, slide your finger from right to left on the condition/action you wish to delete.